How to Establish a Wide Plank Wood Flooring
Wide plank wood flooring is a traditional type of soil that predates the use of modern language and placement of table’s slot. The planks used to create the ground are often a variety of sizes, creating a floor surface unique from any other. Changes in the spectator planking steer attention to the focal points in the room. Nailed in place, the planks create a sharp surface level, offering old fashioned look to any decor.
How to Establish a wide plank wood flooring, Place the planks in the room 72 hours before installation so that the wood acclimate to the room. This prevents the contraction or expansion of the timber after placement. Cover the ground with a layer of rosin paper. Secure the paper stapled wooden subfloors in place every 12 inches. Assure concrete subfloors by spreading a layer of construction adhesive on the first floor with a paint roller in the siesta, and then roll the paper in place.
Place the wooden boards to the subfloor 10d by driving nails through boards, plywood subfloor and wooden beams with a hammer. Place a nail every 5 cm along the edges, nailing an angle of approximately one inch from the end of the table and directly in the joist below. Fill the nail holes with wood putty the same color as the wide plank wood flooring. Use a spatula to push the mastic in place, and then scrape along the putty surface with the edge of the blade to level out.